I have a question. I have WLC 4404. In local office it works fine. Now I want to add remote AP's to controler. I can't use HREAP because AP's dont support it. Remote office starts with RTR.
My idea is: to create VLAN 19 on rtr, make a small dhcp pool from address which are not used by WLC (same addresation like on WLC) with option 138 10.10.11.10 should it work to connect AP's to controler ?
Thanks for any advice.
P.S. About link, I know it is only 10Mb/s but in about 2 monts we will buy a faster one so I dont worry about the traffic between WLC and AP's.
It should, but what are the ping times from one site to the other. I have had very few clients try that and it works when the other site is not to far away. It's just something you have to try and test.
*****Help out other by using the rating system and marking answered questions as "Answered"*****
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...