Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wlc and ssid

hi, all!

i try to find an answer if wlc can advertise not all ssid to the lap's. how can i setup this feature?

for example - i have 10 LAPs over the building and 5 SSID's.

i need to advertise only 3 SSID at the 1 floor and all of them at the second floor.

is it possible?

ps sorry for my bad english ))

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: wlc and ssid

Hi Vadik,

Yes it's possible - in version 4 you would use WLAN override. Basically in the radio config of each AP you can select WLAN override, and then check the WLANs that you want to advertise.

In version 5 you would use AP groups.

I've found this quite helpful:

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1114777

J

2 REPLIES
New Member

Re: wlc and ssid

Hi Vadik,

Yes it's possible - in version 4 you would use WLAN override. Basically in the radio config of each AP you can select WLAN override, and then check the WLANs that you want to advertise.

In version 5 you would use AP groups.

I've found this quite helpful:

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1114777

J

New Member

Re: wlc and ssid

thanks a lot!

140
Views
0
Helpful
2
Replies