I have a WLC 5508 and 4408 servicing 100 APs. the problem is client wont connect to the closest AP! this problem leads to creating over association situation for one AP.
I have tried disabling the slow data rate. I tried the Client Load Balancing and facing even more problems! I tried Maximum Allowed Clients Per AP Radio and set it up to 25 but I was still able to see even 55 client connected to the AP while 2 meter away there was another freaking AP which servicing 5 people!
I have seen this problem with CCX capable client too although most of my clients are Samsung laptop (never buy their laptops) and not CCX capable
can any one tell me how can I tell or force a client to connect to the closest AP?
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...