Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC in a DMZ for guest access

I have one internal 4400 and one in a DMZ. I want to configure the DMZ WLC to provide Guest Internet access. I am unable to find much information on doing this. I have a WLAN called Guest defined on both controllers. And both controllers are defined in as mobility anchors. What I don't under stand is how to configure the interfaces. Do both interfaces for the WLAN Guest need to be in the same VLAN and subnet? Example:

On the internal WLC WLAN Guest to tied to an interface named Guest with an IP address of 172.26.254.5/24 What does the interface need to look like on the DMZ WLC?

1 REPLY
New Member

Re: WLC in a DMZ for guest access

279
Views
0
Helpful
1
Replies