Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC own html-site ago controller-login-site

Hi,

we have a WLC 4400.

Is the following possible?:

We want to have a html-site (with regulations) at which end should be an Accept-Button. After a click on that button, the user should be forwarded to the internal Web Login Page.

It's equal for us, if our own html-site is located at the wlc directly or at an external web server.

Is there any command like "dir flash"??

Thank you for an answer.

greetings L.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: WLC own html-site ago controller-login-site

There are a number of variations available for the default guest user login page that can be modified with your logo etc available here

http://tools.cisco.com/support/downloads/go/InterfaceModuleSWT.x?mdfid=279911193&mdfLevel=Model&treeName=Wireless&modelName=Cisco%204402%20Wireless%20LAN%20Controller&treeMdfId=278875243

You will need a login to access this.

The default page in the controller and modified pages generally have the acceptable use policy and login details along with the accept button on the same page

1 REPLY
Cisco Employee

Re: WLC own html-site ago controller-login-site

There are a number of variations available for the default guest user login page that can be modified with your logo etc available here

http://tools.cisco.com/support/downloads/go/InterfaceModuleSWT.x?mdfid=279911193&mdfLevel=Model&treeName=Wireless&modelName=Cisco%204402%20Wireless%20LAN%20Controller&treeMdfId=278875243

You will need a login to access this.

The default page in the controller and modified pages generally have the acceptable use policy and login details along with the accept button on the same page

125
Views
0
Helpful
1
Replies
CreatePlease to create content