WLC's must have same config

[Wireless_Guy]

Hello ,

I have three WLC's - WLC1, WLC2 and WLC3. They are part of mobility groups. I need  WLC-2 and WLC-3 to have the same config of WLC-1.
If I upload the WLC-1 configs on WLC-2 and WLC-3 , will it work ? 

Thanks
 

[Leo Laohoo]

Yes, it will work.  

The only thing, technically, different among them are the IP addresses and the WLC name.  Otherwise, it works.  I've done this so many times already.

[Wireless_Guy]

Thanks for the reply Leo. 
So after copying the configs I need to unplug the WLC-2 and WLC-3 , console in and from CLI need to change the management IP address.
 

[Sandeep Choudhary]

Hi,

upload the config from WLC1.

Make changes(Ip adderss..and dynamic interface ip...etc) in config for WLC2 and then download to WLC2 by chossing command > Download from wlc gui, and same for wlc3.

Regards