I just finished a deployment of WLC 188.8.131.52 with about 30 AP's. Everything is working fine, but the WLC is showing an AP as rogue, not wired with a radio MAC address that is the same as one of my functioning registered AP's.
It doesn't appear to be causing any problems other than the WLC showing it as rogue.
Jeff we see this, too. We had a lot of Bugs with older releases concerning this issue since 2006 (3.2) but all should be fixed with current 184.108.40.206. We had not open a new SR yet for the latest release.
If you happen to get a new BugID for these please let me know.
TAC is telling me that this is a bug, and they are seeing it come up again in later releases. They do not, however have one that fits completely, so they are creating a new bug for this. I will let you know what the ID is when it comes.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...