Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC web-auth/LDAP integration issue

Hello All,

I know this has been talked about a few other times, but here's the issue I'm running into and would appreciate any assistance. I'm trying to tie in LDAP to my WLC for wireless web-authentication. This setup works when I have a simple OU containing a user account, but when I incoroporate Global Security Groups under the OU, it no longer works. It still talks to the LDAP server, but it appears to not be going through the Global Security Groups to find the users. Here's the User Data Base DN setup that I have.

OU - Group Name

>

Global Security Group - wireless users

     >

     Global Security Group - Remote users

          > dc=domain, dc=com

my question is, when putting this into the security LDAP section on the WLC, it will not work utilizing this:

ou=Group Name,dc=domain,dc=com

Do I need to do anything with the Global Security Groups in the above string?

Thanks in advance for assistance

2 REPLIES

WLC web-auth/LDAP integration issue

I have to say I'm not clear on what is your problem.

Can you paste the exact ldap configuration you ahve on the WLC ?

You should have a base DN.

If your base DN is "ou=Group Name,dc=domain,dc=com", then the WLC will only look under "group name" ou and not the whole domain.

Searching the whole domain would require a base DN of "dc=domain,dc=com"

New Member

WLC web-auth/LDAP integration issue

Hey Nicolas, sorry for the delayed response. I actually went a different route and incorporated RADIUS to provide for more security. Thanks for your response though.

848
Views
0
Helpful
2
Replies