I want to seperate the guest interface by using ne of the other ports on the WLC2006. Is this possible or do I have to trunk everything on the port I have configured for management and ap-manager. I have port 1 as the management and ap-manager, but I want to use port 2 as the guest inteface.
Thanks for the feedback. Howerver, what I found out is that on the 2006 you can only configure 1 port for ap-manager so there is now way to seperate your dynamic interfaces. I know you can do it on the 4402 and the 4404, but I thought you can on the 2006.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...