Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC2006 internal DHCP

I am looking for help setting up the internal DHCP server. It keeps telling me the scope network and mask are incorrect. I have tried various setting and have looked around for a cfg example.

My MGMT int is 10.96.30.10

AP-MGR is 10.96.30.15

The scope and AP mgr interface can be any ip range, i do not need anything specific.

I have been trying 10.96.30.20-30

on network 10.96.30.10 / 255.255.0.0

Also does the 2006 support layer2?

2 REPLIES
Silver

Re: WLC2006 internal DHCP

I recommend to use external DHCP server, according to below link. There is DHCP relay issue if WLC as a DHCP server.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008070ba8f.shtml

Moreover, the 2006 supports LWAPP layer 3 only. The 44xx supports layer 2 & 3.

More info. from Q&A :

http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a008064a991.shtml

Hope this helps.

New Member

Re: WLC2006 internal DHCP

thank you. i was putting the Netwrok address in incorrectly.

148
Views
3
Helpful
2
Replies
CreatePlease login to create content