I have a 50AP wireless network witn Cisco 1242AG autonomous APs, WDS on a dedicated AP, and ACS 4.2.1 (build 15 Patch7). We use EAP-FAST and it works wonderfully. I need to move to controller based operations now (WDS and autonomous APs are coming to end of life so to speak)
We have (2) 4402 Controllers (running 188.8.131.52 software) and 1 1131AG LWAPP for testing. When I attempte to authenticate to the controller/radius server, the radius server enters this in the failed logins log:
Invalid message authenticator in EAP request. The Ip and name of the controller are correct on the oeeor entry.
Is there anything special I need to do for EAP-FAST on the controller for it to work. Since it is currently working fine on the ACS server and APs, I thought it would be pretty easy
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...