Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC4400 / Radius / Service port

Can a controller reach a radius server through the service port?

3 REPLIES

Re: WLC4400 / Radius / Service port

Not sure, but in the following url, it states management interface for the controller

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080871921.shtml#wlc

Here is a url with several config examples

http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html

Re: WLC4400 / Radius / Service port

It should not be able to as the service port is meant for out of band service. I've never tried it personally, but the service port is meant for manual intervention on a WLC when network connectivity to the mgt interface is not available. I have configured the service ports with unique addresses on a secondary LAN before for a customer, but it is NOT something I suggest.

New Member

Re: WLC4400 / Radius / Service port

I finally had a 4402 controller to test and it works. The controller is able to contact a radius server through the service port.

155
Views
0
Helpful
3
Replies