Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC4404 version 6.0.199.4 and AP1262 doesn´t work

Hello,

I read in the document´s from Cisco that AP1262 does not work with WLC version 6.0.199.4...and the AP debug sents

"Nov 24 12:05:05.522: %CAPWAP-3-ERRORLOG: This AP is not supported in controller version 6.0.199.4"

My Question is...have you experiences with the 7.0.98.0 Version ? Have someone install that and works it fine ??

Or have someone a workaround for this AP1262 to work with the 6.0.199.4 Version at WLC 4404 ?

Thanks

Erkan

1 REPLY
Cisco Employee

Re: WLC4404 version 6.0.199.4 and AP1262 doesn´t work

Hi,

AP1262 is only supported on version 7.0.98.0 or later: http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html.

6.0.199.4 does not include support for AP1262:

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn6_0_199_4.html.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

696
Views
5
Helpful
1
Replies
CreatePlease login to create content