Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WPA clients stop communicating - getting "WEP key is wrong" logs

This seems straight forward. 4400 controllers with 1242 access points. The clients are a mix of windows CE devices and "dumb" wireless serial devices. The WLAN is configured as WPA1/WPA2 on the controller and are authenticated via PEAP/RADIUS. Encryption is AES.

The controller/WCS server has this message when a client has trouble, rebooting the client resolves it. "The WEP key configured at the station may be wrong." These messages occur about every few minutes with 85 clients.

Only thing I can think of there is some kind of key rotation problem. Any ideas or why I'm getting messages about WEP?

Thanks in advance.

1 REPLY
Anonymous
N/A

Re: WPA clients stop communicating - getting "WEP key is wrong"

The fix for this is available with WLC release 3.2.171.6. In order to stop these error messages, upgrade the WLC software to 3.2.171.6.

158
Views
0
Helpful
1
Replies
CreatePlease to create content