I have configured one site to site vpn. Both phase 1 and Phase 2 seems to be up but I am unable to ping peer ip. What may be the issue? Is there any chance other side may be blocking esp packet over protocol 50 ? PS DEBUG IS not allowed as per guide...
Forum Posts
I'm monitoring the Cisco Power Supply (among a ton of other things), and it's working very well. However, I have one question regarding the Cisco Catalyst 4500. This particular model has two physical power supplies, each with two inputs. When I use t...
I need to set dhcp option 60 on the ISP interface for IPTV. I have a FTD 1010 FDM managed with the latest firmware 7.3.1-19. How can this be done?
https://community.cisco.com/t5/forums/postpage/category-id/communaute-francais/choose-node/true/attachments-key/6b1f2086-8c2e-4820-8178-adb9964d9865#
Hi,I have a asa 5516-x, the status light is flashing orange. A connection via the serial interface is not working.how can i fix the problem?Thanks for your help.best regardsJan MielkeNetwork and Firewall Specialist, Datacenter Infrastructure
On the MV72 cameras, we have them set to "MOTION BASED RETENTION" which purges vide with no motion after three days.How can I export all motion events for one hour? Do I have to do each motion event individually? I have tried the normal way and get "...
Resolved! Monitor options by door
In some of our older security setups, we had monitors by the back door that would show 2-4 cameras outside so someone could see if anyone was outside the door. The only way I can see to do this currently is to use SASD with a preconfigured view and...
How do I download the "Safety and Security Desktop"? I currently have Cisco cameras and the Safety and Security Desktop on multiple other desktops. I have the login information from the vendor, but need the Desktop on an additional terminal.
I have this error pop up every now and then. When I go take look at the camera it will have a red x by it, but when I go to the live view and past recordings everything looks good. Is there a way to find out what caused this error? I attached an exam...
Hello,I have my vsom server showing configuration: critical and enabled: critical. on the Affecting Current Status, I have the error message: VSOM dropped 136627 events due to a large number of events received. i tried to clear the critical alert in...
Hi,I'm stumped by this issue, and hopefully you guys can help me. We are using VSOM 7.7 and SASD to view the cameras. Recently, All our PTZ cameras pictures stop rotating. Usually, we enable the PTZ toggle on the picture camera feed and move the mo...
we recently had our Cisco 2911 wiped by our agency and were given a base configuration to load on our cisco 2911. Unfortunately I did not notice at the time that aaa authentication was enabled as the default login. I wrote the configuration and no...
Resolved! SNMP OID for RA VPN on FTD/FMC
Hello, we use a FTD 2110 and manage it via FMC (both Version 6.6.4). We have a SNMP Monitoring tool running which worked fine so far. There was a sensor configured to collect data for remote access VPN (RA VPN). I used OID 1.3.6.1.4.1.9.9.392.1.3.26....
Resolved! Clearing an HttpServer Core Dump
Hello all, I had an HttpServer Core dump critical way back in July on my VSOM server. I've followed recommendations on other posts here to clear this by deleting the file and resetting the server status, but I still get an email for it every. Single...
