Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Camera Archiving With Motion Detection

Dears,

I configured recording with motion detection on VSOM 6.3.2 but I think the recording is not working properly.

I can't find all the actions happened in the archiving.

Can anybody tell me step-by-step configuration for the archiving with motion detection.

Thanks,

Ahmed Ossama

Ahmed Ossama CCIE#26611 +966531567747
2 REPLIES
New Member

Camera Archiving With Motion Detection

Dears,

Hope any one can reply to me...

Regards,

Ahmed Ossama

Ahmed Ossama CCIE#26611 +966531567747
New Member

Camera Archiving With Motion Detection

Hello Ahmed,

Thank you for posting your question on Cisco Support Community forums.  A colleague of mine posted an excellent guide to creating motion archives which you may find in the Documents section of CSC (direct link posted below.)

https://supportforums.cisco.com/docs/DOC-15088

As a rule, for the 24xx, 25xx and 26xx Cisco cameras, it is best to configure the smallest motion windows possible which still guarantee coverage of the area of interest (middle of a door for example rather than the entire wall containing the door.)  You are permitted up to 4 motion windows per camera on the above mentioned models.

I hope that helps,

Jim

537
Views
0
Helpful
2
Replies
CreatePlease to create content