Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can the camera CIVS-IPC-2935 be installed on the wall mount bracket CIVS-IPCA-1011?

Hallo!

I have a question: can the camera CIVS-IPC-2935 be installed on the wall mount bracket CIVS-IPCA-1011=, and сan it be powered from the CIVS-IPCA-PWR12V= (cable CIVS-CAB-BCE)?

Thx!

2 REPLIES
New Member

Can the camera CIVS-IPC-2935 be installed on the wall mount brac

Hi Konstantin,

Thank you for contacting Cisco Partner Helpline.

My name is Lynzie, I will be assisting you with case <00525248> regarding your inquiry about the compatibility of the CIVS-IPCA-1011= and CIVS-IPCA-PWR12V= with the CIVS-IPC-2935.

I went ahead and checked with our internal resources and I was advised that the CIVS-IPCA-1011= is compatible with the CIVS-IPC-2935.

Unfortunately the CIVS-IPCA-PWR12V= is not compatible with the CIVS-IPC-2935. The CIVS-IPC-2935 uses 24 VAC or 24 VDC power.

CIVS-IPC-2935

Outdoor Pendant, Clear Dome, PAL, 35x, SD PTZ IP Camera     

List Price: USD  4,900.00

CIVS-IPCA-1011=

Wall mount, use with CIVS-IPCA-1010, 2500, 26xxV Dome series List Price: USD 50.00

CIVS-IPCA-PWR12V=

Cisco IP Camera Power Supply

List Price: USD 60.00

Please reference these links:

Cisco Video Surveillance 2900 IP Camera User Guide Installation

http://www.cisco.com/en/US/docs/security/physical_security/video_surveillance/ip_camera/2900/user_guide/ch01.html#wp1073728

Cisco Video Surveillance 2900 Series IP Cameras Compare Models http://www.cisco.com/en/US/partner/products/ps11252/prod_models_comparison.html#~accessories

Cisco Employee

Can the camera CIVS-IPC-2935 be installed on the wall mount brac

Konstantin,

while the answer provided by the Partner Helpline is not wrong, it requires a clarification.

While you can use CIVS-IPCA-1011 wall mount, you will still need a threaded pipe with 3/4-in. thread on one and 1.5-in thread on the other side. This part is not available through Cisco though.

Another alternative is to use wall mount with 1.5-in thread, i.e. Pelco SWM-GY or IWM-GY.

Regards,

Gregor

1313
Views
0
Helpful
2
Replies
CreatePlease login to create content