CIVS-IPC-2911 PTZ Question

[Alan Cipriano]

Hi friends,

I'm configuring Cisco 2911 PTZ camera (By Pelco), but I doubt one configuration:

Is it possible to configure this model of camera is operating with a routine of always record movement at 180º degrees?

Example: Set point A and B, the camera recording constantly moving between these two points.

Please, can you help me?

Thx

Alan

[Jonathan Young]

I don't have this model of camera for testing, but according to the documentation you should be able to define presets at each point from 0º to 180º and create a PTZ tour containing these presets. Set the amount of time to dwell on each location. And don't forget to enable the PTZ tour once created.