Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Modify VSOM IP address!

hello,all:

     I encounter this question:I hava one MSP-2RU Server.After initial setup wizard with IP address configed as 10.10.10.1 and media server,operations manager(7.0) located in one server. But the custom require to modify IP to 192.168.10.X. I didn't find out the way after read some documents.I'll appreciate your help!

Everyone's tags (3)
2 REPLIES
New Member

Modify VSOM IP address!

hello.

You can try do this on server with yast ( if you use suse).

Or read this http://www.cyberciti.biz/faq/linux-change-ip-address/

New Member

Re: Modify VSOM IP address!

There are two options to change the IP address of an existing server.

1) Download the recovery software, do a factory, and start fresh. This method is destructive.

2) Remove the media server from the VSOM, stop services, do system-config-network-tui command and modify the IP address, start services. If necessary do a reboot so the interface starts using the new IP. Add the media server to the VSOM again. This method gives you the option of retaining video and settings.

I have not done option 2 on a co-located VSOM/VSMS however. In that scenario you might need to update the IP address on the VSMC page as well.

Sent from Cisco Technical Support iPhone App

716
Views
3
Helpful
2
Replies
CreatePlease to create content