Operation failed: Media server reported the error Method failed: Status code-404 Reason-Not Found
I have an installation that is showing all cameras with the little red x's; however, the cameras are up and running and I can see the camera streams via VSOM. I get the error listed in the description when I attempt to repair the configurations on some of them.
Also at this same installation, superimposed over the video image is the following error "HTTP response error. Message:".
Has anyone else had these issues? What did you do to fix them?
It's been awhile, but I think the problem was actually a media server configuration mismatch on VSOM. I repaired the media server configuration and was then able to repair the configuration issue with the cameras.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...