Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Operators VSOM

I need to know why in mode Operatos I do not have active the next control:

Title bars, video tools, etc.

I have attached Image from that.

Also i can not to see the control:

Archive Clip Form

View Form

all that only i can to see from super user (root).

Anyone can help me?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Operators VSOM

Go to the Cisco Video Surveillance Operations Manager User Guide section

page 3.9 Playback controls.

http://www.cisco.com/en/US/partner/products/ps9153/products_user_guide_list.html

make sure you have checked the Operator Lists: Checked = View appears in lists that operators can switch to

In the View config.

3 REPLIES
Cisco Employee

Re: Operators VSOM

Go to the Cisco Video Surveillance Operations Manager User Guide section

page 3.9 Playback controls.

http://www.cisco.com/en/US/partner/products/ps9153/products_user_guide_list.html

make sure you have checked the Operator Lists: Checked = View appears in lists that operators can switch to

In the View config.

New Member

Re: Operators VSOM

Thanks , I can now to see playback control over Operators , but I can not to see playback control over the video live.

I have to image attachet.

can you can help me?

New Member

Re: Operators VSOM

Hi,

You need to have DVR/VMR mode enabled for this. You will find it in the admin pages of VSOM under settings. Please make sure that you are using an Nvidea or ATI card. Anything else will give you problems wint VMR mode.

Also you will only get playback controls on one live feed at a time.

Hope this helps.

824
Views
0
Helpful
3
Replies