Hi, Have you obtained a full fix for this as i have the same issue.
I have been able to fix this temporarily by doing the following:
Opening the Hardware Module in CPAM and selecting the camera from the Cisco VSM Camera Driver.Double click and edit the cameraConfig. Copy encoder type detail and paste it in Camera model.
I have done this on all my PTZ on CPAM and initially it works, but I have selected the camera again and it has lost this piece of data. I suspect it is to do with how the CPAM imports the camera codec from VSOM.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...