Cisco Prime Assurance with 3rd party NMS

[lohjintiam]

Hi all,

Is it possible to integrate Prime Assurance with 3rd NMS such as HP OpenView / Whatsup Gold / IBM Tivoli through SNMP or other methods?

Thanks!

-JT-

[khassan]

Following types of notifications are supported.

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-5/assurance/advanced/guide/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_10_5.pdf

[Giovanni Sciotti]

Hi,

did you find answer to your question?

Bye!

[Don2001L]

Hello,

We have Prime sending traps to our ENMS and we are receiving them - But we dont have the MIB to decode them ?

A search pointed to the CISCO-EPM-NOTIFICATION-MIB - but it doesnt include these ( one provided as example )

Trap 1.3.6.1.4.1.9.9.712.6.1 directly received from . .IP address 1.1.1.1.1
Trap var bind data:
OID:  1.3.6.1.2.1.1.3.0  Value:  1010370861
OID:  1.3.6.1.6.3.1.1.4.1.0  Value:  1.3.6.1.4.1.9.9.712.0.1
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.2.0  Value:  �  
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.3.0  Value:  �
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.4.0  Value:  OperStatus_LradIf!ec:bd:1d:aa:bb:bb!0
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.5.0  Value:  2
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.6.0  Value:  Radio administratively up and operationally down
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.7.0  Value:  1
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.8.0  Value: 
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.9.0  Value:  AP AN-AP-001, Interface 802.11b/g/n
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.10.0  Value:  '802.11b/g/n' interface of AP ' AN-AP--001' associated to controller 'A-Controller-001 (10.1.1.1)' is up.
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.11.0  Value:  3
OID:  1.3.6.1.4.1.9.9.712.1.1.2.1.12.0  Value:  reportingEntityAddress=

( Plus a bunch of Other TEXT )
 

Anyone know what MIB contains these traps ?

I grep-ped through all the V2 Mibs in the tar on the FTP site without luck..

Thanks,

    Don