cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
641
Views
0
Helpful
1
Replies

Monitoring phones unregistered with PCA.

Hi all,

 

I have a great doubt, I need to monitor when a phone goes from registered to unregistered and when this happens an alarm must be created using Prime Collaboration Assurance.

I´m new in PCA so I´d like to know if this is possible 

 

Regards.

 

 

1 Reply 1

Sudhir Parasuram
Cisco Employee
Cisco Employee

PCA doesn't do this for each phone individually as that would be chaotic and simply unmanageable in a network with large number of endpoints. Instead you can setup a PhoneUnregThresholdExceeded per device pool and have it alert you when it hits those limits.

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/12-1/assurance/advanced/guide/cpco_b_cisco-prime-collaboration-assurance-guide-advanced-12-1/cpco_b_cisco-prime-collaboration-assurance-guide-advanced-12-1_chapter_010000.html#ID152

 

PCA 12.1 also brings in a somewhat similar concept at a device level where if a device moves from Managed to Unmanaged state, you will get an alert.

 

HTH.

 

Thanks,

Sudhir