Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

VIP Purple

Phone Discovery

Hi ,

We need to discover  IP phones [3905, 6900 and 9951] in Prime Assurance 9.0.How do we do that?

Is it that we need to manually discover or that can be automated ?

After the licenses have been uploaded successfully, we get High End Multi Codec /High End Single Codec endpoints and Phones/Cius /Movi.Bit confused how to get our model phones.

regds,

aman

4 REPLIES
New Member

Phone Discovery

You need MASS end point licnenses for phones.  Do you have that installed?

Jim Whitten,Product Manager, Cisco

VIP Purple

Phone Discovery

Hi Jim,

thanks for reply.

we have got 500 licenses with Part Code L-PC-A-500-MA-LIC.

Is this what u are referring to? We have already uploaded these licenses on server.

regds,

aman

VIP Purple

Phone Discovery

Hi Jim,

I was going through device managment guide which says

You can also discover the devices (endpoints, TelePresence server, and so on) individually, except

for the Cisco Unified IP Phone 8900 and 9900 series, Cisco Cius, and Cisco TelePresence Movi

endpoints. These endpoints are discovered only with the discovery of the call processor with which

they are registered.

For discovery of Cisco Cius and Cisco Unified IP Phone 8900 and 9900 series, you must enable the

HTTP interface so these devices appear in the inventory table.

But did not find for other endpoint models like 7900, 3905,6900.

regds,

aman

New Member

Phone Discovery

You must discover the CUCM publisher for the cluster

421
Views
0
Helpful
4
Replies