10-10-2008 12:08 AM - edited 03-03-2019 11:52 PM
Hi All in Router i am the getting error:AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0
Router is connected to Switch, both router and switch config is below
can some body tell me how to fix up this issue as i am planning to change Duplex setting router from half duplex to full duplex
will this solve my problem
Router config:-
interface Ethernet0/0
description ### LAN ###
ip address 10.21.1.2 255.255.0.0
ip access-group 141 in
ip route-cache flow
half-duplex
standby ip 10.21.1.1
standby preempt
end
====================
Switch config
interface GigabitEthernet0/1
description ***FREE***
no logging event link-status
no snmp trap link-status
no mdix auto
spanning-tree portfast
spanning-tree bpdufilter enable
spanning-tree guard root
==================
Erros
AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0
AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0
AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0
AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=1, TRC=0