01-02-2010 08:42 PM - edited 03-06-2019 09:08 AM
Dear friends,
On the 2960, i have two .bin images and i am pointing to the latest one.
However, the boot system flash: command along with the new image does not appear in the running config but it appears in the
show boot command.
t3a.sidradc.dmz.01#dir flash:
Directory of flash:/
2 -rwx 2131 Jan 3 2010 07:30:45 +03:00 private-config.text
4 -rwx 8040418 Mar 1 1993 05:31:51 +03:00 c2960-lanbasek9-mz.122-50.SE3.bin
5 -rwx 676 Jan 3 2010 07:28:50 +03:00 vlan.dat
6 drwx 128 Mar 1 1993 03:02:32 +03:00 c2960-lanbasek9-mz.122-44.SE6
546 -rwx 4120 Jan 3 2010 07:30:45 +03:00 multiple-fs
548 -rwx 9001 Jan 3 2010 07:30:45 +03:00 config.text
32514048 bytes total (21123072 bytes free)
t3a.sidradc.dmz.01(config)#boot system flash:c2960-lanbasek9-mz.122-50.SE3.bin
t3a.sidradc.dmz.01(config)#exit
t3a.sidradc.dmz.01#wr
Building configuration...
[OK]
t3a.sidradc.dmz.01#sh boot
BOOT path-list : flash:c2960-lanbasek9-mz.122-50.SE3.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
NVRAM/Config file
buffer size: 65536
Timeout for Config
Download: 0 seconds
Config Download
via DHCP: disabled (next boot: disabled)
t3a.sidradc.dmz.01#sh run | inc boot
boot-start-marker
boot-end-marker
Are you aware of any reasons for this?
Thanks a lot
Gautam
Solved! Go to Solution.