07-27-2010 01:45 PM - edited 03-04-2019 09:13 AM
On a 2811 the redundant power supply is show ing in use and causing our monitoring station to create "power supply failure" alarms. The power supply was replaced but no change. Is there something else going on here? Is there a bug for this? I thought the 2811 only has one power supply. Below is the output. This is the IOS: c2800nm-advipservicesk9-mz.124-22.T1. Thanks
2811Router#sh environment all
Main Power Supply is AC
Redundant Power Supply is attached
RPS status: in use
Fan 1 OK
Fan 2 OK
Fan 3 OK
Fan Speed : Normal
System Temperature: 24 Celsius (normal)
Environmental information last updated 00:00:28 ago