07-28-2010 11:06 AM - last edited on 03-25-2019 03:29 PM by ciscomoderator
HARDWARE/ISSUE: AIRONET AP1240 which has a 2.4 GHz/ 5 GHz radios and is configured to be used as a access point for radio0 and non-root bridge for radio1 using Right instead of Diversity as its primary connections for the radios, but it would not allow our PDA sytems to connect to the internet.
Troubleshooting: I've checked the IOS, configuration, and its security configurations and none of these configurations have changed from when dot11 radio1 was still working. I checked the radio channel and the AP is set to a specific radio channel that would not interfere with the rest of the AP's within its group. I checked all physical hardware(cables and antennas) attached to the AP and nothing seems to have changed. After going through these steps, I replugged it and I was still unable to connect to the internet.
What could be the problem when I receive this message in the event log? Dot11 radio1 cannot associate; no response.
Solved! Go to Solution.