08-23-2010 09:40 AM - edited 03-06-2019 12:36 PM
I have a 6509 (Sup 720-3B) that upon reboot- just goes straight to the Rommon prompt. I've done everything according to the following article:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml
All of the information shows correct - even on the set printout on the rommon upon reboot, and once the router is booted. When you get to the rommon port- all you have to type is boot and it does. It just looks like autoboot is not on. Any ideas?
Greg
Solved! Go to Solution.