When I walk the SNMP tree, I see the ports below but they don't seem to match the hardware. This devices has 4 Ethernet LAN ports + 1 Ethernet WAN port + 1 Radio
I have eth1, eth2, eth4, WAN, and the radio active and the SNMP walk shows eth0, eth1, eth2, ipsec0, br0 as up and connected. Have a found a SNMP mismatch or where am I missing the ports?
Thanks in advance for your assistance
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "lo"
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "eth0"
iso.3.6.1.2.1.2.2.1.2.3 = STRING: "eth1"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "eth2"
iso.3.6.1.2.1.2.2.1.2.5 = STRING: "teql0"
iso.3.6.1.2.1.2.2.1.2.6 = STRING: "sit0"
iso.3.6.1.2.1.2.2.1.2.7 = STRING: "tunl0"
iso.3.6.1.2.1.2.2.1.2.8 = STRING: "gre0"
iso.3.6.1.2.1.2.2.1.2.9 = STRING: "ipsec0"
iso.3.6.1.2.1.2.2.1.2.10 = STRING: "ipsec1"
iso.3.6.1.2.1.2.2.1.2.11 = STRING: "ipsec2"
iso.3.6.1.2.1.2.2.1.2.12 = STRING: "ipsec3"
iso.3.6.1.2.1.2.2.1.2.13 = STRING: "br0"
