06-09-2011 06:36 PM - edited 02-21-2020 04:22 AM
Hi,
I am currently doing a Proof of Concept using Cisco's new ISE product. I am having issues getting the url-redirect raidus attribute working. I have read the troubleshooting document and everything in it points to it should be working. By debuging the radius information on the switch I can see that its passing the url-redirect to the switch which in my case is was https://DEVLABISE01.devlab.local:8443/guestportal/gateway?sessionId=0A00020A0000001604D3F5BE&action=cwa. Now to remove DNS issues etc from the equasion if I copy and paste this URL into the client browser it takes me to the correct place, and I can login and it changes VLAN's accordingly. Now as far as I know the client should automatticaly be redirected to this URL which is not working. Below I have included one of the debugs to show that the epm is in place.
DEVLABSW01#show epm session ip 10.0.1.104
Admission feature: DOT1X
ACS ACL: xACSACLx-IP-PRE-POSTURE-ACL-4de86e6c
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://DEVLABISE01.devlab.local:8443/guestportal/gateway?sessionId=0A00020A0000001604D3F5BE&action=cwa
I have also attached my switch config. Any help would be greatly appreciated.
Dan