Hi,
I have a 4507 cisco switch loaded with two sup-modules.When i try configuring this switch i got the below error message
Enter configuration commands, one per line. End with CNTL/Z.
OFS-MUM-SW14(config)#
Config mode locked out until standby initializes
configuration mode locked by 'PARSER Client'.Please try later.
OFS-MUM-SW14(config)#
Enter configuration commands, one per line. End with CNTL/Z.
OFS-MUM-SW14(config)#
Config mode locked out until standby initializes
configuration mode locked by 'PARSER Client'.Please try later.
OFS-MUM-SW14(config)#
Can some one tell me what is the source of this error and how to resolve this error.
please find sh module info below.
OFS-MUM-SW14#sh mod
Chassis Type : WS-C4507R
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 2 Supervisor IV 1000BaseX (GBIC) WS-X4515 JAE1004UFGV
2 2 Supervisor IV 1000BaseX (GBIC) WS-X4515 JAE1004UFGV
3 48 10/100BaseTX (RJ45)V WS-X4148-RJ45V JAE0935K25S
4 48 10/100BaseTX (RJ45)V WS-X4148-RJ45V JAE0845ZRQA
5 48 10/100BaseTX (RJ45)V WS-X4148-RJ45V JAB05330ANA
6 48 10/100BaseTX (RJ45)V WS-X4148-RJ45V JAE0935K1Z
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 0017.95d3.ebc0 to 0017.95d3.ebc1 5.0 12.2(20r)EW1 12.2(31)SG Ok
2 0017.95d3.ebc2 to 0017.95d3.ebc3 5.0 Offline
3 0015.62e7.0440 to 0015.62e7.046f 2.9 Ok
4 0012.7fb6.0090 to 0012.7fb6.00bf 2.7 Ok
5 0005.9a1e.d380 to 0005.9a1e.d3af 1.6 Ok
6 0015.62e7.0350 to 0015.62e7.037f 2.9 Ok
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+-------------------
1 Active Supervisor SSO Active
2 Standby Supervisor SSO Disabled
