12-27-2011 06:12 PM - edited 03-16-2019 08:43 AM
Dear all,
I check cisco document and found that, Cisco CME 9.0 support ATA 187 to connect fax/phone
I try to config SIP as bellow :
voice register global
mode cme
source-address 10.17.30.14 port 5060
max-dn 20
max-pool 20
tftp-path flash:
create profile sync 0086112851333914
!
voice register dn 1
number 8556
!
voice register dn 2
number 8557
!
voice register pool 1
id mac 0C85.25A6.9845
type ATA-187
number 1 dn 1
codec g711ulaw
!
voice register pool 2
id mac 8525.A698.4501
type ATA-187
number 1 dn 2
codec g711ulaw
!
But the ATA 187 cannot register with CME 9.0
i did debug command "debug tftp events" and found the error as below:
Dec 28 02:09:48.153: TFTP: Looking for CTLSEP0C8525A69845.tlv
Dec 28 02:09:48.389: TFTP: Looking for ATA0C8525A69845.cnf.xml
Dec 28 02:09:48.389: TFTP: Opened system:/its/vrf1/ATADefault.cnf.xml, fd 4, size 403 for process 153
Dec 28 02:09:48.393: TFTP: Finished system:/its/vrf1/ATADefault.cnf.xml, time 00:00:00 for process 153
Dec 28 02:09:48.905: TFTP: Looking for CTLSEP8525A6984501.tlv
Dec 28 02:09:49.125: TFTP: Looking for ATA8525A6984501.cnf.xml
Anyone who can help me with this issue
Thanks,
Minh