12-22-2011 05:41 AM - edited 03-10-2019 05:34 AM
Hello,
I have problem with my IPS module in ASA5510. After central power failure the module stopped work.
Status of module is "Unresponsive" (over show module command). All attempts to get it live ended with this status.
I tried "hw-module module 1 reset", "hw-module module 1 recover", replace and insert module with reload of appliance, but no success.
During this tests I set "debug cplane 255" and saw this messages:
cp_connect: Connecting to card 1, socket 7, port 7000
cp_connect: Error - cp_connect() returned -1
cp_check_connection: handle -1, conflicts with connection 1 (-1)
cp_check_connection: handle -1, conflicts with connection 2 (-1)
cp_check_connection: handle -1, conflicts with connection 3 (-1)
cp_update_connection: Error updating connection_id 0
Do you know anybody what it means? I tried to find any information on the web about it, but no success
Unfortunately, this device isn't already under contract, so I cannot open the case.
I cannot reconcile with the idea that it is a hardware failure and module is dead.
Thanks for any advice.
Radek