cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Cisco WAP4410n Access Connection Problems

Hi,

In a bit of a pickle and not sure which way to turn as I think I have exhausted all possibilities.

We currently have 2 Cisco WAP4410n wireless access points running within our network.  They are both on version 2.0.4.2 firmware and both on a static ip address within our infrastructure.

They are configured as:

WAP4410n 1:

AP Mode: Access Point (default)

Security: WPA Personal TKIP Channel 6

WAP4410n 2:

AP Mode: Wireless WDS Repeater

Security: WPA Personal TKIP Channel 6

Identical SSID and password.

We have around 25 users all within range of the Access Points working happily for the most of the time.  Even the seamless switch over works well too.   The problem I have is that occasionally around once a day the internet goes offline for everyone.  They remain connected to the Access Point just not able to connect to the internet.  All machines connecting to it are of Windows 7 HP laptops.  To resolve the issue I have to restart the Access Points which immediatley makes everything working again until the next day.

The times are all up and down too, so not a timing issue.

Hope you can help.

Many Thanks in advance.

Who Me Too'd this topic