06-13-2012 03:24 AM - edited 03-07-2019 07:13 AM
Hi,
I have 10 2950 switches on my network that support only 64 vlans on each one. I actualy have requrement to cleate around 100 vlans acros them, can I switch off vtp and create required vlans manualy or is there any other solution to solve that?
I will have more or less following set up:
router
|
2950 - vlan 1,2,3,4,5,6,7,8,9,10
|
2950 - vlan 11,12,13,14,15,16,17
|
2950 - vlan 18,19,20,21,22,23,24
|
2950 - vlan 25,26,27,28,29,30
|
2950 - etc...
|
2950 - etc...
.... etc.
Solved! Go to Solution.