cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

DMVPN doesn't reconnect after reload

Chris Coho
Level 1
Level 1

I have a (currently) 3 location fully meshed DMVPN.  This will eventually be a 12 location DMVPN.  The problem I'm having is if I reload the Hub router, the spoke tunnels never reconnect automatically.  The only way I have found to make them reconnect is by connecting to the spoke routers via the CCP and under "Interface and Connections" and disabling then enabling the DMVPN Tunnel0, at which point the DMVPN's immediatley come back up.  Obviously this required manual intervention is less than ideal.  Is there a config setting I am missing that will fix this?

Thanks!

Who Me Too'd this topic