Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

New Member

%Error opening nvram:/startup-config (Permission denied)

I'm getting an odd error, permission denied trying to issue "show config" at user level.  We use this throughout the environment with no issues.

IOS: System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T.bin"

R1#sh run | i aaa

aaa new-model

aaa authentication login default group tacacs+ local

aaa authorization exec default group tacacs+ if-authenticated

aaa authorization commands 1 default group tacacs+ if-authenticated

aaa authorization commands 15 default group tacacs+ if-authenticated

aaa accounting commands 15 default stop-only group tacacs+

aaa session-id common

R1#sh run | i priv

privilege exec level 1 traceroute

privilege exec level 1 ping

privilege exec level 1 show logging

privilege exec level 1 show configuration

privilege exec level 1 show privilege

privilege exec level 1 show

R1#disable

R1>show config

Using 11855 out of 262136 bytes

%Error opening nvram:/startup-config (Permission denied)

Who Me Too'd this topic