10-30-2013 03:08 AM - edited 03-11-2019 07:57 PM
Hi,
I had a unit of Cisco ASA5505 firewall unable to complete the boot up and display error message as below:
i2c_read_byte_w_wait() error, slot = 0x4, device = 0xa0, address = 0 byte count
= 1. Reason: I2C_HOST_BUSY_ERROR
Failed to read offset 0 from IDPROM ARRAY slot 0,I2C addr 0x4, dev 0xa0, error 5
纃osfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 306 files, 16520/62780 clusters
dosfsck(/dev/hda1) returned 0
lina_bigphysarea_size: open /proc/bigphysarea failed, error 2
Rebooting.....
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008
i2c_read_word_w_wait() error, slot = 0x0, device = 0x64, address = 134 byte coun
t = 2. Reason: I2C_HOST_BUSY_ERROR
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
Loading /asa825-k8.bin... Booting...
i2c_read_byte_w_wait() error, slot = 0x0, device = 0xa0, address = 0 byte count
= 1. Reason: I2C_HOST_BUSY_ERROR
platform_init_from_idprom: i2c_error 5
Platform
Loading...
i2c_read_byte_w_wait() error, slot = 0x0, device = 0xa0, address = 0 byte count
= 1. Reason: I2C_HOST_BUSY_ERROR
platform_init_from_idprom: i2c_error 5
=
Anyone face same issue as mine?
Solved! Go to Solution.