11-03-2013 02:11 PM - edited 03-11-2019 07:59 PM
Hello experts,
Iam running some tests for ext vendor connectivity and when connecting my test 3560G g0/1 (access port) to ASA5505 (9.x) Eth0/5 (or any port), noticed increase in "switch ingress policy drops" (via show in eth0/5 o/p). Checked in the forums and it appears that its an issue asked multiple times. So after issuing 'no keepalive' on 3560G port (per Cisco docs), the drops stopped totally. Wanted to check whether it is recomended to use 'no keepalive' directly connected segment (ASA Eth0/5 -> Gi0/1). Gi0/5 access port and is in vlan x. Names, hard of duplex/speed etc.. none worked to resolve the drops.
Thanks in advance
MS
Solved! Go to Solution.