02-18-2014 08:29 AM - edited 03-07-2019 06:16 PM
Hi, I am Ashley and i am testing the Cisco 4500X using wireshark capture. advanced ip services IOS.
The capture runs fine when storing the wireshark file on the bootflash. No worries.
But when i configure the destination as USB0 my pendrive, it fails.
The usb device is fine and is writable. I tested it by copying from bootflash to usb0:
Followed the instructions in the config guide.
It still fails.
Can someone please help.
Thanks,
Solved! Go to Solution.