Hi everyone
Hope you can help us with this issue.
We already configure the WLC using this guide: http://mrncciew.com/2013/02/14/configuring-snmp-on-wlc/
snmp v2: enable
snmp v1: enable
default port values
community: incaenic with ip and mask 0.0.0.0 to allow access from any network or ip
traps receiver: community: incaenic ip: 10.100.100.15
when we try to discover the WLC with the PI it gave the error "SNMP Connectivity Fail"
WLC is on subnet 10.100.102.0/24 and PI in 10.100.100.0/24; there is a Catalyst 3850 between then with no access list on then.
Did someone can guide us with this?
Best Regards.
Alvaro Rugama
