12-08-2014 07:51 AM - edited 03-07-2019 09:48 PM
I have set up Cisco switches previously via the hyperterminal and been able to get them configured and operating, but I have limited knowledge of the tools and processes.
I have a 2960-S with 48 ports and 4 SFP modules.
I have good feedback on the 48 ports, but I can not get the SFP modules to ether be recognized or show any activity on the 2960-S. The unmanaged switch I have the fiber connected too, is indicating a network connection and activity, but the 2960-S is not indicating any connection on the SFP modules.
I have added the switch configuration file.