Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2 port analog module connection

hi all

i have a 1841 cisco router with 2 port analog module, one pc will dial using motorola or us robotics modem to this 1841 router.

is there any sample configuration for this setup.

all posts will be appreciated with ratings

Regds

Binoy

1 REPLY
Blue

Re: 2 port analog module connection

please provide the exact model number of the part that contains the two analog ports.

using an asych port for dial-up IP connectivity is possible.

using an FXO port for dial-up IP connectivity is not possible.

please see the following link for ASYNC dial-up configuration info:

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008009455a.shtml

or

http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a0080093c31.shtml

96
Views
4
Helpful
1
Replies