running into a weird issue. we have a 2811 we use to dial into oob modems we have on other gear. we telnet into the 2811 or port 7001 which is linked to 5 modems/ttys. often after we disconnect the tty still shows in use. you cannot "clear" the line. eventually all ttys are stuck in use and we need to reboot the box to clear it. we have current code on it. any thoughts? as far as configs this is what we have
Obviously that is preferred however I am sure some users are simply closing the xterm or ssh window. However even if that was the case shouldnt I at the very least be able to clear the stuck lines with the "clear line" command? And beyond that I would think the cisco would be able to determine that the controlling telnet session has gone away. Is that unreasonable?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.