02-07-2007 07:50 AM
I have 3620 configured as a RAS server. The unit provides Async dial-up to PPP clients.
Will someone please provide the config details to auto-disconnect the PPP sessions when idle for 30 minutes.
Thanks in advance.
DWM
Grand Rapids, MI
02-07-2007 01:32 PM
A dialup session will disconnect at the end of dialer idle-timeout provided there is no interesting traffic for that specified time transiting over the connection, further the interesting traffic is defined using "dialer-list" command and bound to the asyn interface using "dialer-group" command.
An example:
interface Group-Async x
dialer in-band
dialer idle-timeout 1800 << 30 mins
dialer-group 1
group-range x xx
dialer-list 1 protocol ip permit or anything similar to specify interesting traffic.
More detailed explanation can be found at:
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094eb7.shtml
Thanks,
Mak
02-08-2007 05:01 AM
Thank you for taking the time to respond. ON my own, I hadn't been able to find helpful documentation.
This should do it.
DWM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: