Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3G HWIC "no matching chat script found"

Hi All

For some reason my clients 2811 router will not recognize the configured chat-script for their 3G backup.

Mar 26 15:27:35: Ce0/0/0 DDR: Attempting to dial telstra

*Mar 26 15:27:35: CHAT0/0/0: Attempting async line dialer script

*Mar 26 15:27:35: CHAT0/0/0: no matching chat script found for telstra

*Mar 26 15:27:35: CHAT0/0/0: Dialing using Modem script: d0efault-d0ials0cript & System script: none

*Mar 26 15:27:35: CHAT0/0/0: process started

*Mar 26 15:27:35: CHAT0/0/0: Asserting DTR

*Mar 26 15:27:35: CHAT0/0/0: Chat script d0efault-d0ials0cript started

*Mar 26 15:28:35: CHAT0/0/0: Chat script d0efault-d0ials0cript finished, status = Connection timed out; remote host not responding


chat-script telstra "" "ATDT*98*1#" TIMEOUT 30 CONNECT

interface Cellular0/0/0

ip address

ip mtu 1460

ip virtual-reassembly

encapsulation ppp

dialer in-band

dialer idle-timeout 30

dialer string telstra

dialer-group 1

async mode interactive

fair-queue 64 16 0

ppp authentication chap callin

ppp chap hostname xxxxxxxxxxxxxxxxxxx

ppp chap password xxxxxxxxxxxxxxxxxxx

ppp ipcp dns request

line 0/0/0

exec-timeout 0 0

modem InOut

script dialer telstra

no exec

transport input all

speed 384000

Running "start-chat telstra 0/0/0" works fine.

Any ideas?



New Member

Re: 3G HWIC "no matching chat script found"

had the same problem.

configuring the line section did the trick:

line 0/0/0
  script dialer YOUR_CHAT_SCRIPT