Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
ar
Community Member

7200 as VPN Concentrator

Hi.

I have a 7206 as my MPLS PE.

I want to setup a remote ipsec vpn access to this and map to one of the mpls vpn/vrfs.

I will use a cisco vpn client on the remote site.

What is the minimum IOS for 7200 to run IPSEC. I find the old 12.2(31) SB16 dont have "crypto" configurations.

Also any documentation how i can configured the 7200 to match with the cisco vpn client software?

I'm trying to explore the vrf-aware ipsec but Im not sure it this will work with the cisco vpn client.

thanks

4 REPLIES
Hall of Fame Super Gold

7200 as VPN Concentrator

First of all you should consider buying a crypto module for your router, otherwise it will not really work or perform very well.

ar
Community Member

7200 as VPN Concentrator

Yeah I will include the module accelerator.

I'm concerned more of how to configure the 7200 as VPN concentrator for remote sites (dial-up with unknown public ip).

Also would like to use SSL.

Remote site will either use cisco or microsoft vpn clients....

Any good documentation for this?

Hall of Fame Super Gold

7200 as VPN Concentrator

Plenty, and just a search click away

Come back anytime if you have specific questions...

ar
Community Member

7200 as VPN Concentrator

yeah many.

Though I havent seen a solid document for vrf-aware ipsec combining dynamic-maps at static crypto peers.

I managed to test site-to-site and its working. I tested IPSEC to MPLS VPN connection.

Now I want to test dynamic-maps where the VPN concentrator will set peer as 0.0.0.0.

It's not working on my tests.

Any good docs for combining dynamic/static maps in one interface crypto-map?

642
Views
0
Helpful
4
Replies
CreatePlease to create content