has anyone experiences with the BRI at the 800 ADSL over ISDN Routers (like 836).
I wonder what's the difference between the feature sets.
OOB-Management and Dial-Backup over ISDN is described in the Datasheet as feature of the 'IP/FW/IPSec-3DES-PLUS-Dial-Backup' IOS only, but in my tests it seems that the BRI is a fully functionaly routed Interface in all feature sets.
I think there is no more need to buy another ISDN-Router like 801 or 803 when I have full ISDN connectivity at the ADSLoISDN-Routers with standard feature set. And with the 'DMZ-Ethernet' feature I have even a secondary routed Ethernet-port and there is no more need to buy a 831.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...